Izdelki za cevi za (4208)

T-Verbinder 5540 - Rohrverbinder: Ø 50 mm

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. Material:Stainless steel 1.4404 (AISI 316) O ring:EPDM Operating pressure:16 bar Operating temperature:-30 - 120 °C Dimension:15 - 108 mm

ESPIRAL PU98 10x7x1,5 MM Material:PU98 Diâmetro:10x7 Cor:Azul/Vermelho/Amarelo/Neutro

TUBO DI RAME PREISOLATO GREEN EN 12735-1, RIVESTIMENTO IN PE-X ESPANSO EUROCLASSE B S2 D0, ANTI CONDENSA. È l'evoluzione del tubo di rame isolato, specifico per impianti di condizionamento e refrigerazione, con guaina anti condensa. Lega:Cu-DHP (Cu: 99.90% min., P: 0.015÷0.040%) Residuo carbonioso:<0,05 mg/dm² Garanzia:30 anni contro la corrosione Esterno:LD-PE Temperatura di utilizzo:-80° +120° C Resistenza alla diffusione del vapore d’acqua:µ= > 9000 secondo EN 13469 UTILIZZO SPECIFICO:• Refrigerazione • Condizionamento ad acqua e gas tipo R 410A, R 32, ecc.

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):134 J/kg/°K Thermal conductivity:15.6 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:199 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

Tubo de acero Ø48x3 mm, galvanizado por inmersión en caliente Código:PS-LF075 Dimensiones:75x200 cm Peso:9.0 kg

We produce aluminium pipe bends with the following characteristics and product specifications: DIN EN 573-3, 755-1, /-2 /-9 Alloy:AlMgSi 0.5 F22 Outer pipe diameter:38.0 – 100.0 x 2.0 mm Wall thickness:1.5 mm / 2.0 mm or thicker Radius:250 / 300 / 500 / 800 / 1,000 mm

Kompakter Hydraulikzylinder Maximaler Betriebsdruck 500 bar Kolbenduchmesser von 16 - 160 mm Kolbenstangen gehärtet und geschliffen Standard bis Hub 200 mm und auf Sonderwunsch darüber verschiedene Sonderausführungen Bestellbeipiel für Sonderausführungen: 506-2-020- V mit Viton-Dichtungen für Temperaturen über 100°C 506-2-020- 30 Hubverkürzung beim Ausfahren mittels Dinstanzscheibe, Hub: 30mm 506-2-020- M8x15 Kolbenstange mit Außengewinde M8 x 15 (Gesamtlänge = L + 15 mm) Weitere Standard-Hubvarianten der Bauweise M506 finden Sie auf dem CAD-Portal - zusammen mit ausführlichen technischen Daten, den genauen Bestellnummern und den CAD-Daten.

Es gibt viele gute Gründe, Rohre spanlos zu trennen. An erster Stelle steht natürlich die Sauberkeit. Aber auch Präzision und Leistung sind nicht unerheblich: Unsere spanlosen Orbitaltrennmaschinen ermöglichen präzise Schneidergebnisse. Ihre Rohre können anschließend sofort umgeformt werden. Das spart Zeit und Geld. Technische Daten: Trenneffizienz: max. Ø 28 x 2 für Edelstahlrohre Kürzeste Trennlänge: - 25 mm (ohne Auseinanderziehen) - 55 mm (mit Auseinanderziehen) Vereinzelungsleistung: bis zu 2.000 Stück pro Stunde Rohrtrennmaschine:spanloses Rohrtrennen - orbital Rohrdurchmesser:6 - 28 mm Wandstärke:max. 2 mm (Materialabhängig) Taktzeit:2,2 - 8 Sek.

Gelötete und verzinkte Hydraulikleitung Anwendungsgebiet: Nutzfahrzeuge

CNC Turning stainless steel pipe Material:Stainless steel Processing method:CNC Turning Surface treatment:clean and deburring

A Fartrouven R&D é uma empresa europeia líder especializada no desenvolvimento de tecnologias, soluções técnicas e equipamentos para a produção de tubos poliméricos e compósitos utilizados na indústria do petróleo e gás, na energia do hidrogénio e na indústria da construção. Fornecimento de equipamentos para a produção de tubos compósitos flexíveis para campos petrolíferos TCP/RTP: - Tubo composito termoplástico; - Tubo Termoplástico Reforçado. Dimensões dos tubos produzidos: 2”…10” Pressão de funcionamento: 600 a 20.000 psi Projeto e fornecimento de fábrica de tubos não metálicos TCP/RTP

VIERKANSTAHL S235JR(W) – Hochwertige Vierkantprofile Zum Verkauf steht VIERKANSTAHL S235JR in bester Qualität. Ideal für verschiedene Bau- und Konstruktionsprojekte. Das Profil bietet hohe Festigkeit und exzellente Bearbeitungsfähigkeit. Erhältlich in unterschiedlichen Größen und Längen. Perfekt für industrielle Anwendungen und Handwerksprojekte. Für weitere Informationen oder Bestellungen stehen wir Ihnen gerne zur Verfügung. LANGE: 110mm Hohe: 3mm Breite: 5mm

The Aerolift pipe lifting solutions are applied for many different situations and places. During production, storage, transhipment, and internal transport. For this specific situation we designed a lifting solution to handle bare and coated pipes aboard the ship. The ship, The Amazon, was converted to an ultra-deepwater J-Lay vessel. Our vacuum lifting devices are installed on 4 cargo hold cranes. In tandem mode the cranes will be used to load and unload 24-meter-long pipes in a cargo. The lifting devices are designed to limit deflection of double joint pipes or to handle the entire pipe by vacuum only.

Insulation Pipes and Pipes The insulation for pipes and ducts is suitable for use in installation and heating works in industry, offices and residential buildings. The insulation for pipes and ducts fulfills all the thermal and acoustic insulation criteria of central heating pipes, air conditioning installations, sanitary water and sewage installations. It can also be found under the name Politub Roflex. The basic characteristic of the insulation tubes for pipes and pipelines is elasticity and good resistance to the mechanical and chemical actions of common construction materials. The insulation for pipes and ducts has a closed cell structure and can be incorporated into all types of floors. Specifications: Color: Graphite Grey; Name: Polyethylene Pipes or Polytubes; Use: for drinking water networks, natural gas, telecommunications, sewerage, jacket for pre-insulated pipes used in the transport of thermal agents, irrigation and other fluids.

Beltseal Beltseal is a gasket “belt” produced with a special hydro-expansive rubber that reacts upon coming into contact with water that increases its initial volume. Thanks to its geometry, Beltseal is very quickly applied directly to PVC piping without additional processing. It hermetically seals any discontinuities that could easily be found in the concrete due to the presence of PVC conduit pipes. In many cases, such discontinuities could pass from one side of the masonry to the other and thus seriously compromise the waterproofing of the masonry itself. There are three sizes available which are respectively suitable for diameter pipes: 70/90 mm, 110/125 mm and 160/200 mm. The hydroexpansive capacity of Beltseal has been laboratory tested with two different types of water: demineralised and with a highly basic pH (to simulate conditions in contact with concrete). Expansion tests showed a respective change in volume of 300% and 250%. For underground concrete constructions with conduit pipes, where the wall is in direct contact with the ground and where there are no layers of waterproofing outside the masonry itself: basements, cellars, underground garages, below-ground and cellar environments, etcetera. Position the Beltseal hydrofoam gasket centrally in respect of the length of the pipe (using one gasket per pipe). No. 1 Beltseal gasket for each conduit pipe to be sealed. Packaging: Bulk from 1 piece Unit of Measure: €/piece

Les tuyaux de qualité alimentaire sont fabriqués à partir de silicone réticulé au platine et présentent de très faibles températures de transition vitreuse. Il sont transparents et permettent donc de voir au travers de l’entoilage. Excellente résistance à la chaleur doneRenforcé avec plusieurs couches de tissu polyester doneLa plage de température va de 50 °C à +180 °C Plus d'informations Toutes les dimensions sont disponibles dans des formes droites, des réducteurs droits, des coudes 90 degrés, des coudes 45 degrés, des coudes 135 degrés et des coudes 180 degrés. Nous pouvons également développer des formes sur mesure en fonction de vos exigences/dessins. Vous trouverez ci dessous les pressions nominales pour le Shore Master Utilisation par l'industrie Les formulations des tuyaux en silicone pour l’industrie alimentaire sont conçues spécialement pour le contact avec les denrées alimentaires. Le silicone agréé FDA se caractérise par une réduction des contaminations

NLMK Plate Europe offers high quality steel tubes for sour or mild service applications. The plates are thermomechanically rolled to improve mechanical properties. They are suitable for onshore, deepwater pipelines and fittings.

Schleifen von Längsrohren

Starres, wärmeisoliertes und überwachbares Rohrsystem mit PE-Mantel. Starres, wärmeisoliertes Rohrsystem, PE-Mantel, bis 140 °C, PN 25, DN 20-1000. Mediumrohr Stahl, Wärmedämmung PUR.

Our fittings high quality is based on: – Fittings compatible with PEX pipes without O- Rings – This completely range of fittings is designed in order to offer the most competitive solution for plumbing installations. – Fittings compatible with jaw profiles U and RFz. – Manufactured under the technical standard UNE EN ISO 15875-3.

Das PARKANEX-Rauchrohr ist für den Anschluss von holzbefeuerten Kamineinsätzen an Schornsteinkanäle bestimmt. Mit schwarzer hitzebeständiger Farbe überzogen. Hersteller:Parkanex Gewicht (kg]:9.6000 Artikelnummer:5901592603899

The parts used in connecting pipe.

PipeStrand® S2300 is made for fabricators that want to reduce material cost, while increasing the performance of their filament wound products. Designed to increase production efficiency, while providing excellent hydrothermal stability under pressurized conditions. OUTSTANDING MECHANICAL PROPERTIES Excellent properties in both amine and anhydride curing systems; improved axial tensile strength, interlaminate shear strength and burst stress for high performance filament wound epoxy applications. REDUCE COST Designed for use in filament winding, in both epoxy amine and anhydride curing systems — giving flexibility with one glass input and higher glass loading. GREAT STRAND WETOUT Excellent processing range, fast wetting and smooth pipe surface. LONG SERVICE LIFE Excellent hydrothermo stability and strength retention under pressurized conditions, leading to long service life for installed pipe.

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Our Easygel Protect® cutting solutions guarantee a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel • Suitable for contact with drinking water Reference:EGP32DEC Destination:Cutout Diameter:Ø ≤ 32 mm Longueur utile:180 mm Maintien en place:2 cable ties Conditioning:Gel sheath Minimum quantity:50 units

Unsere emmissionsfreien Wellrohre für die Medizintechnik garantieren eine hohe Flexibilität sowie Stabilität, sind geruchsneutral, beinhalten keine toxischen Schadstoffe und wurden nach einem hohen hygienischen Standard produziert und natürlich verpackt. Gerne entwickeln wir mit ihnen zusammen ihr Lösungssystem, inklusive dem maßgeschneiderten Zubehörprogramm. Verfügbare Qualitäten, max. Gebrauchs- temperatur: EVA: -40°C - + 55°C PE: -40°C - + 70°C PP: -40°C - + 105°C weitere Werkstoffe jederzeit gerne auf Anfrage Anwendungsbereiche: Medizintechnik, Beatmungsgeräte und Narkose- geräte, Colontherapie, Darmspülgeräte

Binek araçlar için hidrolik bağlantı boruları

En ce qui concerne le raccord pour tube rigide 2N, le tube est introduit à l’intérieur du raccord, la jonction étant assurée par une olive d’étanchéité. La fixation est assurée par une bague de serrage qui encoche alors le tuyau ou le tube sous l'effet de serrage de l'écrou moleté. On obtient ainsi une jonction par adhérence étanche, mais démontable à volonté, dont la conception permet d’éviter tout volume mort sans compromettre le passage intégral, le diamètre intérieur du raccord correspondant à celui du tube. Résistance aux fluides:haut

In Abhängigkeit von den Durchmessern bzw. von dem geforderten Betriebsdruck werden Bauteile in Wanddicken von 1,00 mm bis 3,00 mm geliefert.

plastic non-flame-emitting halogen free spiral electrical installation pipe